outback fx2000 experience? [RE-wrenches]
Windy Dankoff, Dankoff Solar
windy at dankoffsolar.com
Thu Nov 21 16:21:37 PST 2002
<x-flowed>
>
>Hey Wes,
>
>...You are switching
>twice the current at 120vac so I usually parallel the two-pole contacts
>that a standard pressure switch comes with.
>
>Good luck -- Kurt
The timing of the 2 sets of switch contacts is far from synchronous,
so that method is not very effective for increasing its current
capacity.
The best way is to use a "heavy duty" pressure switch that's rated
for 2HP, 230V.
Windy
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list