Ground fault protection [RE-wrenches]
William Miller
wrmiller at slonet.org
Fri Nov 15 22:10:30 PST 2002
Christopher:
$139 is indeed reasonable and I have one on order for this client. One
problem: if you don't have, want or need a PSDC enclosure, then mounting
one of this baby is a real pain. I will have to fabricate my own
enclosure, the same complaint I had with the Trace PVGFP. How about a
small, hinged front enclosure so the breaker can be mounted and you can get
to the back of it to wire it?
William
At 08:13 PM 11/14/02 +0000, you wrote:
>
>I think that a properly installed ground fault protection system would
>have substantially reduced the damage which occurred. Its really cheap
>protection - or even "insurance" if you think that way... The cost for
>our OutBack OBDC-GFP/2 is $129 and it can protect two 60 amp PV array
>controllers. It also gives you something to point at when the fire
>marshall / insurance company arrives (...We even installed ground fault
>protection even though the NEC said we didn't have too on a
>non-dwelling/ground mounted installation...).
>
>
>Christopher Freitas
>OutBack Power Systems, Inc.
>cfreitas at outbackpower.com www.outbackpower.com
>Tel 360 435 6030 Arlington WA USA
>
__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600 Fax: 805-438-4607 VMail: 805-546-4875
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
H. L. Mencken
__________________________________________________________________
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list