Ground fault [RE-wrenches]

[Joel Davidson]

Glue a piece of 3/4 inch sheet rock to plywood before mounting the equipment.

Allan Sindelar wrote:

> ----- Original Message ----- From: "Christopher Freitas -
>  > Mounting all power electronics on a fire-proof surface is always a good
> > idea IMHO.
>
> Agreed! And we have certainly broken that good idea many times. We have used
> plywood as a substrate panel for shop preassembly of small systems, and we
> often mount to plywood or similar when we do upgrades to existing systems,
> such as a SB50 upgrade. It's just so darn easy to mount to. Outback panels
> (or previously, Power Panels) with steel backplates are a good approach for
> large, new systems, but I would sure like to know what other Wrenches have
> found to take the place of plywood, or for fire protection as per this
> thread, on existing systems.
> Allan @+E
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================