xantrax/SW generator interface problems. [RE-wrenches]

[Brad Bassett]

Someone at Xantrex,

Isn't the whole point of having revision numbers to distinguish one 
revision from another? I can't imagine that putting "SW Series" after a 
revision number and leaving the revision number the same, when it is 
actually a different revision, isn't going to cause confusion, 
consternation, and really pissed off field techs for years to come. How 
about a little common sense clarity please.


> 
> Because of the different products and revisions used, the words "SW 
> Series" were added after Revision 4.2 to help identify the product and 
> can also be used to help determine if you have the latest revision of 
> the SW inverter.  
> 



Brad Bassett
Schott Applied Power 
Tumwater, WA office
bsbassett at earthlink.net

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================