Hypalon Cable [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>
I'm with Drake on this one. Batteries are not UL listed yet the 
interconnects for them have to be? What about roll-your-own bussbar? 
Nuts. It's politics or ignorance or both and should be changed. There 
is very little safety or fire issue here.
As to the price, the 4/0 Cobra is at least $1.00 per foot more than a 
good quality welding cable. If you figure two 10' inverter cables and 
probably another 20' or so for both series and parallel 
interconnects, that's $40.00 wholesale. You could say that's nickel 
and dime stuff when you view the overall cost of a system, but 
there's LOTS of that sort of thing going on in 690. PV is held to a 
higher standard than all other generation in the NEC. We are not 
going to get truly mainstream until we can off the sum total of all 
these over standard costs.
Bob-O

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================


</x-flowed>