PV System Display Sign [RE-wrenches]

[jberdner at sma-america.com]

Joel:

We have written the display drivers for the signs from Betabrite.
www.betabrite.com

They have a number of sizes available for both indoor and outdoor signs.
Their software can accept and merge a serial data stream form your data
logger.
The software is expensive and is a royal pain in the neck but it is
possible.

If you have any questions, or if I can be of any further assistance,
please do not hesitate to contact me.

Best Regards,

John Berdner

SMA America, Inc.
20830 Red Dog Road
Grass Valley, CA  95945
530.273.4595 (voice)
530.274.7271 (fax) 


-----Original Message-----
From: Joel Davidson [mailto:joeldavidson at earthlink.net] 
Sent: Saturday, June 29, 2002 5:48 PM
To: RE-wrenches at topica.com
Subject: PV System Display Sign [RE-wrenches]

My client is looking for is a display sign to show information about a
PV system We would like a grid-powered, single-sided, 2 post,
gound-mounted, outdoor sign approx. 6 ft wide by 4 ft high. The display
should be 6-inch red LEDs to show PV system kW, accumulated kWh and
other data. We have the DAS. We need the sign. Contact me off line if
you have experience with outdoor signs or if you know someone who does
informational outdoor signs.
Joel Davidson

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================