Trace 4000 SW vs. 1HP 220v well pump [RE-wrenches]
Ray Walters
remotech at taosnm.com
Tue Jun 18 09:18:31 PDT 2002
I've got a few single SW 4024s out there running 1-1/2 HP 220 submersibles
(Franklin motors) through Trace T240 transformers. One is wired before the
pressure switch to limit line losses, the other is wired after the p switch
to cut the phantom load. Both work fine. I haven't tried the Outback, but I
will. This week I'm going to test fire (word choice?) an old T220 model
transformer with a DR3624 on an existing 1-1/2 HP submersible. I know its
not quite on the recommended list, but I'll take some measurements and let
anyone whose interested know what happens. [insert photo of wrench with
fingers in his ears]
Ray
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list