[RE-wrenches]

[William Miller]

Dave:

I've not used the MC cable yet (or TC cable with MC connectors).  My
comment was facetious.

I've been curious about the tray cable, but what I've heard doesn't sound
that great to me.  It goes against my training to have loose cables
wired-tie to framework.  I don't believe I'd be able to run partial runs of
flex and duct seal the ends either.

I recall someone had photos of how this looks and if I have a moment I'll
look back through my e-mails and request some of these in case I'm
absolutely and completely wrong about the tray cable concept.


William



At 09:07 PM 6/9/02 -0400, you wrote:
>William,
>
>I have not worked with MC cable yet. Will I be wishing that these have good
>ol' j-boxes?
>
>Dave
>
><<-----Original Message-----
>From: William Miller [mailto:wrmiller at slonet.org]
>Sent: Sunday, June 09, 2002 3:36 PM
>To: RE-wrenches at topica.com
>Subject: Re: [RE-wrenches]
>
>
>They look great except for the MC cable.
>
>William>>
>
>
>
>
>
>At 01:06 PM 6/9/02 -0400, you wrote:
>>We are considering purchasing Sharp PV modules. Specifically the 165 Watt
>>module with MC cable.
>>At $3.50 per watt the price looks very good. Any feedback on the relative
>>merits of Sharp modules.
>>
>>Thanks for your time,
>>
>>Dave
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
>
>

__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600		Fax: 805-438-4607	VMail: 805-546-4875
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
                                    H. L. Mencken
__________________________________________________________________

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================