SW - GTI Problems [RE-wrenches]

[Bill Brooks]

Wrenches,

Not sure how many know about this yet, but I believe Xantrex is recalling
some of their GTI's. In talking with a representative on Tuesday, they have
found that one of the inductor suppliers gave them out of spec transformers.
That is why many of these GTI's are very noisy.

The way to tell if you have one of the bad ones is you will be able to
clearly see the conductors in the windings. It will also get very noisy
after a while. If you have one that has not gone in the field yet, don't
install it. If you have one like that in the field, send it back.

Bill.


-----Original Message-----
From: Joel Davidson [mailto:joeldavidson at earthlink.net]
Sent: Friday, May 24, 2002 7:39 AM
To: RE-wrenches at topica.com
Subject: SW - GTI Problems [RE-wrenches]


One of my customers started a "listserv" to discuss SW - GTI problems.
He writes:

The listserv is easy to understand.  We can post email to it, and it
gets distributed to all on the list.

If you'd like to join, gen an email to TraceSWGTI-request at ecompute.org.
Put the single word 'join' (without the quotes) in the body of the
message.  Send it.  A few minutes later, you should receive a reply
showing that your request is being processed.  It might take me a few
hours to add you to the list - this is just an approval thing andI can
only access my main email from home. When I do the approval thing,
you'll get another email welcoming you to the list.

This is a moderated list, meaning I will manage it so that we don't have
problems with eedeeots or spam.  The list is remotely managed using
Timbuktu and DMail.

Once you've got an approval back and have been added to the list, you
can post email to the list at TraceSWGTI at ecompute.org.  Note that this
is a different address from the -request address.

If you wish to be removed from the list, send an email to
TraceSWGTI-request at ecompute.org with the single word 'unsubscribe' in
the body of the message.

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================