utility obfuscation and obstruction [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Thu May 9 17:46:26 PDT 2002
Could be,
Still doesn't make much sense though.
jay
"Michael Welch, Home Power" wrote:
> Hey Jay. Makes sense to me. They need someplace to keep the lock. For the TYBOG workshop install we did for Elias a couple of years ago, PG&E had us drill that hole for locking in the on position. Easy to do, the lockout's ON position had a pre-center-punched place to drill.
>
> Jay Peltz, Peltz Power wrote at 05:02 PM 05/08/2002 -0700:
>
> >I think I stated this before, but the disconnect on my 1kw system on my house is
> >
> >LOCKED ON. PG&E did this. They drilled a NEW hole to put the lock on it as
> >they don't have a predrilled hole to lock them on. The disconnect is a
> >standard 2 pole 3R/ non fused knife blade type.
> >
> >This was when I had a time of use meter installed. It had been running without
> >the lock for 1 yr with no problems. When the came out, they said "oh we have to
> >install the lock in the on position." I had them double check this with the
> >supervisor, who said yes indeed this is correct.
> >
> >Now go figure this one.
>
>
> Michael Welch
>
> ------------------------
> "Time is the greatest teacher. Unfortunately it kills all its students"
> Hector Berlioz
>
> Michael Welch, michael.welch at homepower.com www.homepower.com
> Managing Editor, Home Power magazine
> Office Coordinator, Redwood Alliance
> (Not HP mag numbers) 707-822-7884 fax: 707-822-3481
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list