utility obfuscation and obstruction [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Thu May 9 17:43:36 PDT 2002
Hi Jeff,
Best answer yet, I love it!!
jay
"Jeffrey Wolfe, Global Resources" wrote:
> Jay,
>
> It's perfectly obvious, PG&E doesn't want to lose any of those high value
> elctrons that you make for them! Thinking like a California utility, they
> probably figure that during a peak demand day you would shut off your PV
> system in order to drive the price of power up, and then reconnect.
>
> Jeff
>
> On Wednesday, May 08, 2002 8:03 PM, Jay Peltz, Peltz Power
> [SMTP:jay at asis.com] wrote:
> > Hi all,
> >
> > I think I stated this before, but the disconnect on my 1kw system on my
> house is
> >
> > LOCKED ON. PG&E did this. They drilled a NEW hole to put the lock on it
> as
> > they don't have a predrilled hole to lock them on. The disconnect is a
> > standard 2 pole 3R/ non fused knife blade type.
> >
> > This was when I had a time of use meter installed. It had been running
> without
> > the lock for 1 yr with no problems. When the came out, they said "oh we
> have to
> > install the lock in the on position." I had them double check this with
> the
> > supervisor, who said yes indeed this is correct.
> >
> > Now go figure this one.
> >
> > jay
> >
> > Peltz Power
> > northern CA.
> >
> > - - - -
> > To send a message: RE-wrenches at topica.com
> >
> > Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
> >
> > List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
> >
> > Check out participant bios: www.mrsharkey.com/wrenches/index.html
> >
> > Hosted by Home Power magazine
> >
> > Moderator: michael.welch at homepower.com
> >
> >
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list