Kiln [RE-wrenches]
jeff.oldham at realgoods.com
jeff.oldham at realgoods.com
Wed Apr 17 15:57:33 PDT 2002
Sure, it will work just a simple resistive load. It would be even more fun
and a real treat at outdoor shows to use a parabolic solar furnace to do the
job with "toe-tracking" - a mini Solar 1!!
> From the Solar, Wind & Hydro Powered office of:
> Jeff Oldham
> Gaiam- Real Goods & Jade Mountain
> Design & Consulting Group
> 11755 Mid. Mtn. Rd.
> Potter Valley, CA 95469 USA
>
> Ph: 303.222.3814
> Fax: 707.743.1820
>
> www.solardevelopment.com
>
> "When you turn to face the Sun all shadows fall behind you"
> - Old African Proverb
>
-----Original Message-----
From: Smitty [mailto:smitty at aaasolar.com]
Sent: Wednesday, April 17, 2002 2:48 PM
To: Wrenches
Subject: Kiln [RE-wrenches]
I've been fusing and blowing glass for some time now, and I have always
wanted to operate one of my small kilns (15 amp, 115 volt) on solar to
save juice, have a neat-o marketing advantage in the galleries and be
able to add to my burn mark collection with solar. I am planning to use
a DR3624 and I think it will be fine, but I'd like to run it by you guys
and gals first, to save me the trouble if I am missing something here. I
am probably the first idiot on the planet to run a kiln with solar, or
maybe not. Thoughts, advice, experience??? Thanks, Smitty.
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list