Whisper 175 Comments [RE-wrenches]
David Blittersdorf
davidb at nrgsystems.com
Wed Apr 17 09:23:14 PDT 2002
Logan,
What kind of annual average wind speeds do you have in MT? I
consider a low wind site a 8 mph yearly average.
David Blittersdorf
On 16 Apr 2002 at 2:19, William Bryce wrote:
> Hi Travis
>
> I saw first hand the "New" Whisper 175 in action. It self-destructed
> after 3 months of operation. I think that the 175 would work great in a
> low / light wind area, ours preformed extremely well in low to medium
> winds, but I would not install one in high gusty wind areas. It is also
> very noisy in high winds when fully furled.
>
> Cheers
> Logan Bryce
>
>
> Pine Ridge Products
> www.pineridgeproducts.com
> Certified Bergey windpower Dealer/Installer
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
David Blittersdorf
NRG Systems, Inc.
110 Commerce Street
Hinesburg, VT 05461 USA
Tel: 802-482-2255
Fax: 802-482-2272
email: davidb at nrgsystems.com
Web:http://www.nrgsystems.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list