600 vdc arc testing [RE-wrenches]

[Ray Walters]

Eric and all;

I found an old  "quick" twist lock connector in my shop. Its from Cam-Lok
Inc. Cinti, OH  , E1015 series. It is marked: "not for interrupting
current". The twist lock mechanism appears to be in the metal not in the
insulation as I previously mentioned. 
I contacted Entech, but they haven't done any ground modules in a few
years. They said they would use those same connectors again if they needed
though. They had two good points of advice: make sure the outer covering is
UV rated when ordering, and use vaseline or similar connector sealant to
keep moisture out of the connection. 

Ray 

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================