power station not charging [RE-wrenches]
hugh piggott
hugh.piggott at enterprise.net
Sun Jan 6 02:27:06 PST 2002
<x-flowed>
thanks William,
>
>Our problems were cured by a reset to factory defaults. Actually, we had to
>reset two or three times to clear out the demons. I have experience with
>other firmware programmed equipment and resets are often required. Has
>this been tried?
Yes it did occur to me to try that. It's not so easy, as the rest
button seems to be defective, but I got him to disconnect the battery
and wait ten minutes, but this made no difference (although the
parameters were reset). Maybe we should try that again a few times,
then.
--
Hugh
http://www.scoraigwind.co.uk/
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list