variable speed AC well pumps [RE-wrenches]
David Henry
david at harmonyfarm.com
Thu Nov 21 17:49:42 PST 2002
<x-flowed>
Matt,
The variable speed pumps use a 1.5 or 2 hp motor and a variable
frequency drive.
At full pump output that's the HP your inverter has to run. Also an
engineer at Franklin said they have a nasty ~7000 + watt surge when
your first turn them on that charges some capacitors in the
controller. After initial start up they have a soft start. I decided
not risk it. Also they have poor efficiency at low volumes.
David
David Henry
Harmony Farm Supply
3244 Hwy 116 N.
Sebastopol, Ca 95472
voice 707-823-9125 X14
fax 707-823-1734
david at harmonyfarm.com
www.harmonyfarm.com
>Allan,
>
>Hayes, but they might have dropped the 3/4 since the last time I put one in.
>They're pushing the variable speed, constant pressure pumps now. Very
>expensive, and they don't believe that they will work with an inverter. I
>don't see why not.
>
>Matt
>----- Original Message -----
>From: "Allan Sindelar" <allan at positiveenergysolar.com>
>To: <RE-wrenches at topica.com>
>Sent: Thursday, November 21, 2002 4:57 PM
>Subject: Re: AC well pumps (Was outback fx2000 experience?) [RE-wrenches]
>
>
>> Matt,
>> I haven't seen a 3/4 hp conventional AC sub in 115VAC; 1/2hp is the
>largest,
>> I thought. Who makes it?
>> Thanks.
>> Allan @+E
>>
>> ----- Original Message -----
>> From: "matthew tritt" <solarone at charter.net>
>> I have installed several 115 volt sub
>> pumps using a single SineWave. These are available (through me!!) up to
>3/4
>> hp.
>>
>> - - - -
>> To send a message: RE-wrenches at topica.com
>>
>> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>>
>> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>>
>> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>>
>> Hosted by Home Power magazine
>>
>> Moderator: michael.welch at homepower.com
>>
>>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
--
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list