SWR2500U Some derating likely [RE-wrenches]

jberdner at sma-america.com jberdner at sma-america.com
Wed Nov 20 15:35:52 PST 2002


Joel:

I would expect very little to no actual power loss given this scenario.

If you have any questions, or if I can be of any further assistance,
please do not hesitate to contact me.

Best Regards,

John Berdner

SMA America, Inc.
12438 Loma Rica Drive, Unit C
Grass Valley, CA  95945
530.273.4595 (voice)
530.274.7271 (fax) 


-----Original Message-----
From: Joel Davidson [mailto:joeldavidson at earthlink.net] 
Sent: Wednesday, November 20, 2002 3:34 PM
To: RE-wrenches at topica.com
Subject: SWR2500U Some derating likely [RE-wrenches]

How much derating is likely with an SWR2500U inverter mounted on an
outside north wall in the shade with good ventilation with either 24
each KC120-1 solar modules or with 22 each SP140 solar modules and a
temperature range of 5  to 122 degrees F.?
Joel Davidson
(Michael, Thank you very much for moderating this list which is like
herding cats).

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================







More information about the RE-wrenches mailing list