OutBack MPPT Charge Controller [RE-wrenches]

[Allan Sindelar]

Christopher,
Will the unit be programmable to serve 32VDC systems as well? We have quite
a few old systems that started around Jakes (remember, he's called "Windy",
not "Sunny" from the old days around here) and later added some PV, usually
as 36V nominal sets, who could really benefit from MPPT technology.
Allan @+E

----- Original Message -----
From: "Christopher Freitas - OutBack Power" <cfreitas at outbackpower.com>
> The MX60 is a single model for 12, 24, 36, 48 and even 60 volt battery
> systems (125 vdc max PV open circuit voltage).  Only the voltage
> regulation setpoints need to be changed when installing a MX60 on a 48
> vdc system (12 vdc is the default setting).  All setpoint adjustments
> are made on the built in 4 line 80 character LCD display which also
> shows output watts and KWH.

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================