xantrax/SW generator interface problems. [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>
Nick,
I could be wrong, but I believe that ALL GTI compatible SW inverters 
manufactured until a few weeks ago ago have Rev 4.20 firmware and 
have the genny interface problem. Any Xantrexer out there can set me 
straight?
Bob-O

>Bob-O  Jay, and the rest---I was told that you can't determine if a
>particular SW unit needs the f ix chip by serial number or birthday. You
>have to power it up and read the rev. number on menu three. I THINK what
>they told me was that if it says "REV 4.20" you're ok.(about the strange
>error message) If it says "Rev 4.20 SW series", you can use the chip. I'm
>trying to verify that now. Nick Houser,  Off Grid Power.
>----- Original Message -----
>From: "Bob-O Schultze, Electron Connection" <econnect at snowcrest.net>
>To: <RE-wrenches at topica.com>
>Sent: Tuesday, August 27, 2002 7:04 AM
>Subject: Re: xantrax/SW generator interface problems. [RE-wrenches]
>
>
>>  Jay,
>>  See if you can get to Brian in Tech support. You'll need your serial
>>  # and the birthday of the machine if possible. They are only
>>  available for a certain range of GTI compatible inverters with Rev.
>>  4.2 software.
>>  Good Luck, Bob-O
>>
>>  >I am looking for the person at xantrax that gives out the new "fix chips"
>for
>>  >the generator interface problems.
>>  >
>>  >Does anyone know whom I should contact to get the chip?
>>  >
>>  >thanks,
>>  >
>>  >jay
>>  >
>>  >peltz power
>>
>>  --
>>  Bob-O Schultze, Electron Connection
>>  PO Box 203, Hornbrook, CA 96044
>>  800.945.7587 or 530.475.3402
>>  fax 530-475-3401
>>  www.electronconnection.com
>>
>>  - - - -
>>  To send a message: RE-wrenches at topica.com
>>
>>  Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>>
>>  List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>>
>>  Check out participant bios: www.mrsharkey.com/wrenches/index.html
>>
>>  Hosted by Home Power magazine
>>
>>  Moderator: michael.welch at homepower.com
>>
>>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================



</x-flowed>