xantrax/SW generator interface problems. [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>
Jay,
See if you can get to Brian in Tech support. You'll need your serial 
# and the birthday of the machine if possible. They are only 
available for a certain range of GTI compatible inverters with Rev. 
4.2 software.
Good Luck, Bob-O

>I am looking for the person at xantrax that gives out the new "fix chips" for
>the generator interface problems.
>
>Does anyone know whom I should contact to get the chip?
>
>thanks,
>
>jay
>
>peltz power

-- 
Bob-O Schultze, Electron Connection
PO Box 203, Hornbrook, CA 96044
800.945.7587 or 530.475.3402
fax 530-475-3401
www.electronconnection.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================


</x-flowed>