PV roofing material [RE-wrenches]
William Miller
wrmiller at slonet.org
Sun Aug 18 07:25:17 PDT 2002
At 10:37 AM 8/13/02 -0700, you wrote:
>Chris,
>
>Regarding Unisolar PVL, I've had very good luck with the 64 W mods and am
>about to do a job using the 85s. I did an install on an east-west facing
>roof (!) which has worked out extremely well, and the owner is happy as a
>clam.
Matt:
Was this a grid tie installation? How did you charge control the modules?
Was there an MPPT controller? A discussion occurred here about E-W
installations a while back and I am curious how one or two MPPt controllers
would work in this scenario.
William Miller
__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600 Fax: 805-438-4607 VMail: 805-546-4875
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
H. L. Mencken
__________________________________________________________________
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list