PG&E with disconnect [RE-wrenches]

[Jay Peltz, Peltz Power]

Hi All,

Wanted to let you know a current situation I've got.

Intertie.

Customer has 350' between main load center to the house with a second load
center on it.

Before I started work I recieved a letter from PG&E  stating that it would be
fine to locate the disconnect at the house with a placard at the MAIN stating
where the house is etc and how to get to it etc.

Both are easily located, they have to drive by the house to get to the
main/meter location.

So now PG&E is demanding that we install a  disconnect  ( which would be a 200
amp) at the main /meter location.  Which means a 200 amp 2 pole 3R box plus all
the hassle of the hook ups, like the wires are now too short etc.

Anybody have any ideas??

Thanks,

jay

peltz power

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================