ST2500 monitoring [RE-wrenches]
John Raynes
john at raynes.com
Wed Jul 10 12:37:11 PDT 2002
<x-flowed>
At 12:55 PM 7/10/02 -0700, you wrote:
>From: Joel Davidson <joeldavidson at earthlink.net>
>Subject: ST2500 monitoring [RE-wrenches]
>
>Does anyone make a data monitor that will work on a PV system with 3
>ST2500 inverters feeding into one service panel? To use my customer's
>words: "My friend has the Sunny Boy computerized monitoring system and
>it sure works slick. It makes it a lot easier to monitor than going
>outside, opening my large electrical box and looking at the analog meter
>that I had installed. With his system he can look at each array for
>trouble shooting and maximal performance. While I can do this at the
>pole it is still inconvenient. I know that that the XR model allows
>this monitoring but since I have the ST 2500 this is not an option. Are
>you aware of a monitoring system that will monitor the individual arrays
>and have a computer link to access and monitor the data?"
Joel,
To my knowledge, there are few if any drop-in packages. Most folks that I
know that do this type of monitoring (myself included) build a system up
from scratch using Campbell Scientific CR10X's or something similar. It
always costs more to tack on a DAS outside the inverter, as opposed to the
SB's built-in capability, because there's duplication of sensors and
instrument circuits. And the Campbell units don't come with a slick
interface, although the computer links to retrieve data, either locally or
remotely, are certainly there.
Cost can vary all over the map, depending on exactly how much you wish to
monitor. But it definitely can be done. Contact me off list if you'd like
to talk about this further.
Regards,
John Raynes
Principal Engineer
Raynes Engineering, Inc./RE Solar
Sandy, UT
Phone: 801-569-2400
email: john at raynes.com
Web site: www.raynes.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list