Need a Deep Well Pump Solution [RE-wrenches]

Tue May 14 18:04:17 PDT 2002

<x-flowed>
>
Allen,
If we can believe my Grundfos chart, the 5SQE O7B-320 is a 3/4HP 
240vac pump which maxes out at 460'@1.6GPM. If you use the CU-300 
pump controller and the R100 infared remote to set it up, you could 
use that pump or maybe the larger 1 HP SQE10C-360 or 10C-410 pumps 
and "dial them down" to 1 GPM. Once set up, the CU300 and R100 could 
either go back in your truck or stay with the pump.
I might stay with the 3/4HP job with that PS2524. My limited 
experience with the SQ pumps has been mixed so far-especially with 
generators.
Good Luck, Bob-O

>The only alternative I can see is a standard AC sub. The Grundfos SQ won't
>work at an estimated 350-400' of lift, as that would require the 5SQ-320,
>which has a 1.40 HP motor, almost certainly too much for a PS2524 with a
>T240. This leaves a standard 3/4 HP Grundfos 5S07-18 or equivalent with
>T240.
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================

</x-flowed>