Air-X & noise levels [RE-wrenches]

[Charlie Robb, Element Engineering]

Travis,

>Stop Switch?  Is OK to use a stop on the 403?

It is definitely OK (and recommended in the manual) with the 403. I don't
know about the AIR-X.

>Proven

Good and quiet machines www.provenenergy.com . I am in the middle of
installing a system using a Proven 600W at the moment. As Chris says, they
are not cheap relative to other makes - unless you do a comparison of cost
per kilo!!

Charlie

Charlie Robb
Element Engineering

77 Society Road
South Queensferry
Edinburgh
EH30 9XP      UK

Tel: 0131 331 5835
Fax: 0131 331 5848
Mobile: 07887 991866

"Disclaimer:

This e-mail is intended only for the addressee and may contain
information that is confidential or privileged.  If you are not the
intended recipient you must not use, disclose, distribute, copy, print
or rely on this e-mail.  If an addressing or transmission error has
misdirected this e-mail, please notify the author by replying to this
e-mail."

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================