Controller Temperature (was ground fault) [RE-wrenches]

[Joel Davidson]

Has anyone measured the temperature of their SolarBoost or the C40 heat
sink? If we have another sunny day tomorrow, I will measure my C40 and
post the reading.

November 15 at 12P:20pm and another sunny day in L.A.
25.5 C. temperature of equipment location (garage with open door)
C40 readings - 22.0 amps at 54.4 volts
40.6 C. temperature at base of heat sink
39.3 C. temperature at top of heat sink

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================