WELDING CABLE - NEC CHANGE REQUEST [RE-wrenches]

[Electrical Energy]

<x-flowed>
Hello Wrenches,

The request for a change in the wording, for the next NEC, is 
completed.  The request is aimed at allowing UL Listed welding cable to be 
used for battery interconnects.

The proposed wording would also allow cable smaller than 2/0 to be used in 
battery enclosures.  This can be useful, especially when a small DC system 
is center tapped off the batteries to run limited loads like cell phones, 
answering machines and 12 volt DC appliances.  The telecommunication 
industry often uses much smaller cables than 2/0.

To participate, please go to the web site below.  Scroll to the bottom of 
the page to: "Welding Cable Petition."  Click on the link "Click 
Here."  Print the form, sign it, and mail it to me at:

Electrical Energy
3138 Lyle Ct.
Denver, CO 80211-3886

http://eagle-access.net/solar/

I am hoping to mail the request in soon, so that it can be resubmitted 
before the deadline in case there are any problems.  Please let me know if 
you have any difficulties in getting the file.

Sincerely,

Drake Chamberlin
Master Electrician
Member, International Association of Electrical Inspectors

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================


</x-flowed>