module connection arrangement [RE-wrenches]
Drake Chamberlin
solar at eagle-access.net
Sun May 19 14:15:04 PDT 2002
<x-flowed>
Wrenches,
With even more series fuses being needed than previously thought, it
becomes yet more attractive to put fuses in module junction boxes. With
inline fuses installed in the j boxes, only enough flex conduits need to be
run to carry the current to a combiner, junction or breaker box.
A j box with a label saying "fuse inside" would make finding blown fuses
relatively easy. This might be more appropriate for a system mounted
within easy reach of the ground. If 15 a amp series fuse is used with
each string of SP 75 modules, it should never blow, unless a fault
condition is encountered. It might be ok to use this method for roof mount.
Fewer conduit whips make a cleaner looking system with less labor and
materials.
Drake
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list