Trace Charge Controller Ratings [RE-wrenches]
Travis Creswell, Ozark Solar
ozsolar at ipa.net
Tue Apr 23 14:39:54 PDT 2002
I used to know...but can't remember for sure anymore. I think one of the
1.25 de-rates comes from the ability of ambient to get down to -5 degrees
and the second is the continuous duty de-rate.
Check out Table 690-7 of the 1999 NEC handbook for the voltage correction
factors.
Also check out 690-8 (a)(1) for PV Source Circuit Currents for another 1.25
de-rate.
And if that wasn't enough check out 690-8 (b) for another 1.25 de-rate.
Take your pick. Now that I think about I think the low temp correction
factor for voltage isn't part of the 1.56 de-rate that everyone uses.
Travis Creswell
Ozark Energy Services
----------
>From: William Miller <wrmiller at slonet.org>
>To: RE-wrenches at topica.com
>Subject: Re: Fw: Trace Charge Controller Ratings [RE-wrenches]
>Date: Tue, Apr 23, 2002, 3:12 PM
>
>>
>>----- Original Message -----
>>From: "John Wiles" <jwiles at nmsu.edu>
>>
>>However, in PV source circuits, we do have the 1.25 imposed on these 100%
>>duty devices because the irradiance can and frequently does go above 1000
>>watts per square meter for several hours around solar noon.
>
>So, does this mean that the fabled 1.56 rating is just a fable? I've seen
>that figure used frequently on this list but apparently no one knows where
>it comes from?!?
>
>William Miller
>
>
>__________________________________________________________________
>William Miller
>Miller Power and Communications
>PO Box 50, Santa Margarita, CA 93453
>Voice :805-438-5600 Fax: 805-438-4607 VMail: 805-546-4875
>email: wrmiller at slonet.org
>License No. C-10-773985
>_____________________________________________________________
>Compatibility:
>Word processor: WP7
>Spreadsheet: Quatro Pro 7
>CAD: Microstation 95, DXF, Visio 4.1T
>_____________________________________________________________
>"Every decent man is ashamed of the government he lives under."
> H. L. Mencken
>__________________________________________________________________
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list