Roof mounting [RE-wrenches]

[Dan]

I have a potential project with Clemson University, there is one hold up.
The estimated system size 2400 watts. The university roofing contractor is
willing to work with me if
1)I cannot pierce the roof- flat roof
2) Cannot use a tray mount system, because the contractor cannot access the
roof area in case of future repairs
3) Mounting has to have the ability to easily apply a new roof in the future
without moving the structure.
4) Has to be approved by a structural engineer (I guess from the school)
Recommendations?
This is the first time I have worked with a flat roof installation.

Regards,
Dan Whigham
S.C. Solar
www.scsolar.com
803-802-5522

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================