C40/DVM Remote 180' [RE-wrenches]

[jay peltz]

I recommend the new Omni meter Plus 2,

Works well and monitors multiple channels.  You can get them either direct or
through Dankoff.

I've spec'ed a few and they are working well.

jay

peltz power

"Bob Ellison, Alternative Energy Systems" wrote:

> I have run e-meters to over 200' using twisted pair cable in the 18 ga.
> range. I did pair the conductors to use 2 of each and still keep them as a
> twisted pair.
>
> Seemed to work fine, been 2 years so far with no problems. Don't see how it
> would work any differently with the C40 meter.
>
> Have a great holiday!
> Bob
>
> RE. Ellison
> Supplier of;
> Diesel Generators &
> Alternative Energy Systems & Supplies
> 34642 Countryman Road
> Theresa, NY. USA
>                                13691-2076
>
> -----Original Message-----
> From: Pagan MacKay [mailto:pagan.mackay at xantrex.com]
> Sent: Thursday, December 20, 2001 4:39 PM
> To: RE-wrenches at topica.com
> Subject: RE: C40/DVM Remote 180' [RE-wrenches]
>
> Hi David,
>
> We think it will work but aren't able to guarantee it will work to 180'
> as I'm unable to find any reports internally that folks have run the
> cable that far with either a success or a failure.
>
> Please let me know what happens.
>
> Best,
>
> Pagan
>
> David Palumbo, Independent Power & Light wrote:
> > I have an older version of a Trace CV40/DVM remote cover with a 50'
> > telephone type cable. Can this be extended to reach a total length of
> > 180'.
> >
> > Dave
> >
> >
> >
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================