PV Installer Certification Program [RE-wrenches]

[Joel Davidson]

Despite fears spread by paranoid members of the PV community, most utility
employees support or are neutral about PV on the grid. Specific obstructionists
are dealt with on a case by case basis ;-)

Monday morning lite utility good news. San Diego Gas & Electric has no written
specs for PV interconnection. They simply require (1) a 1-line drawing review
(2) UL listed products which can include field certification and (3) a manual,
lockable fused or unfused disconnect between the PV system and the grid
(typically in a NEMA3R enclosure - usually Murray or Butler Hammer).

The "Question Authority" generation are now the authority and will come under
question by a new batch of "don't trust anyone over 30"...and the beat goes on.

Bill Brooks wrote:

> Don and all grid-connecting wrenches,
>
> It would be nice to blame this one on the evil utility folks, but that
> unfortunately is inaccurate and misinformation.

<snip>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================