LED lights [RE-wrenches]

[info at backwoodssolar.com]

Look at the possibility of actual series of LEDs embedded in a plastic panel
arranged to form dot pattern numerals of the street numbers. You view the
LED pattern numbers directly rather than illuminating a whole surface sign.
This allows use of low cost 8 or 10 cent standard LEDs. You could make
individual number panels that slide into a frame and plug in.  They are
visible much farther than an illuminated sign.
Steve Willey
Backwoods
----- Original Message -----
From: Allan Sindelar, Positive Energy, Inc. <allan at positiveenergysolar.com>
Subject: LED lights [RE-wrenches]


> We have an opportunity to design, sell, and install some stand-alone LED
> lighting packages for a local subdivision.
> So I imagine that 3-6 "superbright white LEDs" would be plenty, with the
> light about one foot or less out from the sign, or else above it, shining
> obliquely on the signs. We're trying to "think outside the box" of 12V. We
> suspect perhaps 4 AA nicads and a tiny 6V PV module would work for
charging.
> Has anyone done this? Any good importers of high-quality Chinese LED
> lighting packages? > Allan at Positive Energy

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================