Multiple Bonding of DC,& MPPT wind power [RE-wrenches]

[Ray Walters]

My one cents worth: 

The RV products MPPTs can't  work if negative is bonded to ground before
the controller. Some Wind gennys including the Windseekers bond negative to
the mounting pole and thus to ground.
This is a problem with Polyphasor lightning protectors also, since they
bond negative to ground also.
Until I took a Polyphasor apart, I accidently had negative bonded to ground
at multiple points in some systems. Everyone should watch out for multiple
bonding when using wind gennys or Polyphasors. I'd use Polyphasor's single
pole unit, except I can't find anyone to wholesale me any. 

Peace my Solar Americano Brethren,

Solar Ray

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================