SW 5548 [RE-wrenches]
hugh piggott
hugh.piggott at enterprise.net
Mon Jun 11 23:33:03 PDT 2001
<x-flowed>
At 10:23 PM -0700 11/6/01, Jerry Caldwell wrote:
>When I went to
>the ac disconnect, which was in the open position, my
>meter showed ~24v ac hot to ground on the inverter
>side of the switch.
If you wire a small indicator bulb on the AC hot out, it will bleed
off any stray voltage.
I have had problems with 'noise' like that on AC1 hot in. Causing
the inverter to discard the generator in favour of what it thinks is
an incoming mains supply, which will never arrive.
--
Hugh
http://www.ScoraigWind.co.uk
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list