SW 5548 [RE-wrenches]

[Jerry Caldwell]

About a week ago a local inspector gave me a hard time
over a recent installation.  He asked me to
demonstrate to him that the SW5548 inverter could
power the backed up subpanel while not sending any
voltage to the grid.  I set the inverter to float mode
and showed him 120v at the subpanel.  When I went to
the ac disconnect, which was in the open position, my
meter showed ~24v ac hot to ground on the inverter
side of the switch.

I asked one of the tech support guys at Trace about
this and he said it was "noise" and that there was no
power behind the voltage.

Can anyone contribute a little more to this so I might
be able to better explain this in the future?

Jerry Caldwell
Light Energy Systems

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35 
a year!  http://personal.mail.yahoo.com/

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================