Aquastsr in Heating loops [RE-wrenches]

[Dana Orzel]

Controlled Energy does not recommend the "Solar " model and the new one is
too high a flow and not modifiable.
----- Original Message -----
From: <sunwise at cheqnet.net>
To: <RE-wrenches at topica.com>
Sent: Thursday, May 24, 2001 11:25 AM
Subject: Re: Aquastsr in Heating loops [RE-wrenches]


> Dana Orzel wrote:
> The tank acts as a buffer to
> > prevent the over haeting that will result from a flame modulation unit
that
> > is not sensitive enough to handle the evential rise in temerature that
will
> > result when the loop gets warmed up and the return temp is 165 to 170 if
you
> > are running 180 deg to the base boards.
>
> Greetings Dana,
>
> Others have also talked about the A.S. problem with building
> heat/overheating.  I've only done a few such heaters but I thought I
> remembered AquaStar as making (having made?) a "Solar" model that
> differs from the standard models in that it will allow water to pass
> through the unit without adding any additional heat if the temp of the
> incoming water (such as from a tempering tank or baseboard heater) is
> already warm enough.  I haven't bought one for some time but thought it
> had an "S" designation in the model number -- Kurt Nelson
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================