Gray Flex [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>
Joel,
Cheaper and faster is Tray Cable (TC)  or USE-2 CU Wire. The Flexible 
NonMetallic Conduit however, is the best overall, in my opinion. 
Certainly the best and most professional looking. Your designers are 
probably being influenced by a piece written by J.Wiles for Home 
Power a few years back. I took it to task and proved him wrong. He 
backed off, but not down. It's the most serious problem with Mr. 
Wiles. Apparently he's never wrong, even when he is. Hard to respect 
anything a guy like that does, ya know?
Bob-O

>Flexible conduit is used almost always to wire outdoor air conditioners
>and passes inspection. Yet some designers say do not use gray flex for
>PV module interconnects and short sub-panel whips. What is better,
>faster, cheaper than gray flex?

Bob-O Schultze, Electron Connection
PO Box 203, Hornbrook, CA 96044
800.945.7587 or 530.475.3402
fax 530-475-3401
www.electronconnection.com

- - -
To send a message:
 RE-wrenches at topica.com

Archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator:
 michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A  -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================

</x-flowed>