Question for Hugh Piggott [RE-wrenches]

[Roy Butler, Four Winds RE]

Hi Hugh,
    Thanks for the answer.... I'll try the jig and balancing process you mentioned
on one of the machines I have in the shop. And the advice regarding the blade
tracking...excellent point! I will try this and see how it goes.
Roy Butler
Four Winds RE
Arkport, NY

hugh piggott wrote:

>  I would aim to balance it in two dimensions....

> ......make a special jig from plywood or thin metal which bolts onto the blade
> centre.....

> ....check that the blades track each other precisely through space on the
> machine.  And finally that the blades angles are the same.

> If I can make the above clearer, or help any further, just ask.

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

____________________________________________________________
T O P I C A  -- Learn More. Surf Less. 
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01