4024 quirks [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>Tom,
Nothing wrong there. Hitting the red on button moves the cursor to 
the right every time. Or, you could use the set buttons to do the 
same thing, but go either back or forth.
Bob-O


>Just had a strange happening with my own 4024.  I know the On/Off menu
>button is designed to take you back to the on/off menu from anywhere but
>just today I happened to hit the button while actually *in* the on/off menu
>and lo and behold it caused the setting on the menu to change.  i.e. it went
>from ON to CHG.
>
>The manual says nothing about this rather confusing little feature and I've
>never noticed it happening before.  Anyone know if that is what it is
>supposed to do or should I start to worry that something else might be wrong
>as well?
>
>
>Tom Elliot

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

____________________________________________________________
T O P I C A  -- Learn More. Surf Less. 
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01

</x-flowed>