Stranded cables [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>Allen,
well, it depends. On C rates more than 10, it's usually no problem. 
Less than 10 it could melt the Hydrocaps after awhile, especially if 
the customer is a let 'er rip and go shopping while the EQ is on type.
IF the client is paying attention during EQ (like we TOLD him to!) 
then you can actually save some money on gas. When the HCaps are all 
equally warm to the touch, your cells are playing together nicely. 
Shut the noisy beastie off.
Bob-O

>Bob-O,
>    I have long understood that you have to remove the Hydrocaps and use the
>standard caps to EQ, especially with higher C/ rates.  Most ordinary folks
>don't want the hassle; I figure getting some folks to EQ at all is a
>victory.  I haven't used them for this reason.  What's the straight dope?
>Allan at + Energy

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

____________________________________________________________
T O P I C A  -- Learn More. Surf Less. 
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01

</x-flowed>