truly dictatorial [RE-wrenches]

[Lawrence Elliott]

Bill.

Rob replied as a true gentleman to an issue that certainly needs to be
addressed in a forceful but somewhat light manner. It was appreciated.
This forum should be as civil a discourse as we can make it. Perhaps it
is felt that "a forceful voice" is all that many of us who are in the
trenches and not in the temples have as a recourse.
Hope the message was taken in the spirit in which it was given.
And thank you for not replying while you still had a good fire under the
boiler.
Someone could have been burned.
Larry Elliott

> Rob,
>
> Thanks for addressing this. So much steam was coming out of my ears
from
> reading this that I couldn't see my computer to write a reply.
>
> Bill.
>
>
>
>
> Hi Larry.
>
> The comment "truly dictatorial institution" is quite unfair and should
not
> go unchallenged.
>
> The standard that UL uses to test inverters, UL1741, is an industry
> consensus document.  It was written in years past with input from
Trace (and
> myself, and Bill Brooks, and many utility engineers).  It is
harmonized with
> the NEC and IEEE 929.
>
> The standards development effort was and is supported by the US DOE
and the
> SEIA.  It is open to all.  If you have suggestions for any of these
> standards, please email me, or Tim Zgonena at UL, or Ward Bower at
Sandia,
> and we will work to bring them in to the next round.  (There was a
UL1741
> advisory group meeting about 3 weeks ago that was well attended).
>

>
> Rob Wills
>
> -----Original Message-----
> From: Lawrence Elliott [mailto:larry at energyoutfitters.com]
> Sent: Tuesday, December 11, 2001 11:01 AM
> To: RE-wrenches at topica.com
> Subject: Trace SW/UL just a start [RE-wrenches]
>
>
> I have several SW line ties so I have an interest here.
>
> But!
>
> I don't think the problem is so much with Zantrex/Trace. It's with a
> truly dictatorial institution that relates to this industry more like
a
> bull elephant that is not only stupid but has a history of taking
> Prozac.
>
> ==^================================================================
>
>
>
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================