SunnyBoys and quick connects[RE-wrenches]
Jerry Caldwell
solarcowboy at yahoo.com
Tue Aug 14 19:30:20 PDT 2001
Kurt,
Since SunnyBoys utilize a high voltage array, I
believe you need to use a connector that requires a
tool to be separated, and can't just be pulled apart
by hand. We use a piece of 600v rated heat shrink and
totally encapsulate both plugs in the connection.
This way you need to use a knife or some kind of
cutting tool to separtate them.
Jerry Caldwell
Light Energy Systems
--- Kurtj12 at aol.com wrote:
> does anyone have any feedback on whether quick
> connect solar modules are
> acceptable for use with a sunnyboy inverter and if
> the answer is that they
> are not, is there a solution to make the two work
> together?
> thanks,
> kurt
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette:
> http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios:
> www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
>
>
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
More information about the RE-wrenches
mailing list