C40 (China) [RE-wrenches]

[Travis Creswell, Ozark Solar]

I second that.

Travis
----- Original Message -----
From: "Don Loweburg, Offline" <i2p at aol.com>
To: <RE-wrenches at topica.com>
Sent: Tuesday, July 31, 2001 10:25 AM
Subject: Re: C40 (China) [RE-wrenches]


> In a message dated 07/29/2001 7:37:49 PM Pacific Daylight Time,
> cvsolar at aol.com writes:
>
>
> > Hi,
> >   Is it just me or is there a real problem removing the knockouts on the
> > bottom of the new Chinese (Zanthrax) Trace C40 controller?  It seems
that
> > there are three points left unpunched instead of two.  They were tough
> > enough
> > to get out before with two points to rotate on but THREE????
> >
> > John
> > CVSolar
> >
> >
>
> John , It is not just you. This is another anoying detail that Xantrex
needs
> to fix. Those knockouts don't. I usually have to take it all out then use
a
> reducer if I must use 3/4 fittings.
>
> Don
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================