BP85s [RE-wrenches]

[Jeffrey Wolfe, Global Resources]

No transducers, everything is on the DC side with shunts to the Trace DVM's. Should we switch the DVM's occaisionally?

Jeff

----------
From: 	Bill Brooks[SMTP:billbrooks7 at earthlink.net]
Reply To: 	RE-wrenches at topica.com
Sent: 	Monday, April 09, 2001 3:05 PM
To: 	RE-wrenches at topica.com
Subject: 	RE: BP85s [RE-wrenches]

Make sure you switch the transducers back and forth between the two modules
types to alleviate calibration problems between the sensors. It will be
interesting to see the results.

Bill.


> -----Original Message-----
> From: Windy Dankoff, Dankoff Solar [mailto:windy at dankoffsolar.com]
> Sent: Monday, April 09, 2001 6:43 AM
> To: RE-wrenches at topica.com
> Subject: RE: BP85s [RE-wrenches]
>
>
> >I've finally gotten a "comparison" going between Astropower AP-120's and
> >the BP-90's (the label data, but I understand 85W rating.)
>
> ......
>
> >Does anyone think that an old Bobier Omnimeter would do well as a data
> >logger for this setup?
> >
> >Jeff
> >
> >Jeffery D. Wolfe, P.E.
>
>
> Yes, Jeff. The Omnimeter Plus is superb for the purpose (if it's not
> a Plus, it is older model that may have some inherent problems but
> probably OK). It has 4 channels of data logging. You will be able to
> read out overlapping graphs on any old PC, too.
>
> Windy
>
> - - -
> To send a message:
>  RE-wrenches at topica.com
>
> Archive of previous messages:
>  http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette:
>  http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios:
>  www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator:
>  michael.welch at homepower.com
>
>

- - -
To send a message:
 RE-wrenches at topica.com

Archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator:
 michael.welch at homepower.com


- - -
To send a message:
 RE-wrenches at topica.com

Archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

List rules & etiquette:
 http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator:
 michael.welch at homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com

T O P I C A  -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================