SB2500 Serial interface [RE-wrenches]

[William Miller]

Friends:

I have received two serial interface boards for the SB2500 and neither came
with instructions.  Both SMA America techs are in Germany so no technical
support is available for the product line at this time (a distinct
disadvantage to the SB line, but I assume this is not the norm).

Does anyone know how to make one of these things work?  There are two more
pins on the inverter than can mate with the serial interface.  Which side
goes up?

Has the Sunny Data application worked for you?  There is a passing
reference to Excel on the web site.  Do I need to load this inferior
spreadsheet on my poor little notebook?

Thanks in advance.

William Miller

PS: Here are "commissioning instructions, not in the manual:

1. Remove GFI fuse
2. Energize DC input
3. Energize AC input
4. Install GFI fuse.

WM




__________________________________________________________________
William Miller
SLO Communications: Communications and Power Systems Consulting
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600		Fax: 805-438-4607	VMail: 805-546-4875
email: wrmiller at slonet.org
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP7
Spreadsheet: Quatro Pro 7
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"I stand by all the misstatements that I've made." Dan Quayle
__________________________________________________________________

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================