Leviton H.A. & Trace SW compatibility [RE-wrenches]
Kirk Herander, VT Solar
vtsolar1 at together.net
Wed Apr 25 12:53:55 PDT 2001
Hello,
Anyone out there have experience with a Leviton Home Automation system
and TRACE SW inverters?
I just found out the electrician is installing one in combo with a Trace
SW5548 dual power panel.
The system employs "X10" technology. It generates a 5v, 120 hz signal
between the command module and a remote wall switch to turn on and off
lights, through existing ac wiring. I'm wondering if the staircased
waveform of the Trace will cause problems with the Leviton devices. Any
ideas?
thanks, Kirk
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe at topica.com
This email was sent to: michael.welch at homepower.com
T O P I C A -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================
More information about the RE-wrenches
mailing list