Step up/down Correction [RE-wrenches]

[R. Sparks Scott]

	Aaaack! Dumb-out alert! Change the procedure for checking a transformer as
below:
	If you put in 12 VAC and get 24 out, then it is reversed (step-up). If you
get 12 VAC out with 12 VAC in, then you don't have the two 'hot' leads, but
one hot and the neutral on the 240 volt side.

	-S

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

___________________________________________________________
T O P I C A  http://www.topica.com/t/17
Newsletters, Tips and Discussions on Your Favorite Topics