[RE-wrenches] Direct to decking racking attachments
Solar Energy Solutions
solarenergysolutions at yahoo.com
Fri Jun 17 11:09:26 EDT 2022
We’ve been using these for about three years and I’ve not had a problem yet. https://spiderrax.com/
Andrew Koyaanisqatsi
President
Solar Energy Solutions, Inc.
The BRIGHT CHOICE
Since 1987, helping you and your Portland neighbors move towards an environmentally sustainable future.
503-238-4502
www.SolarEnergyOregon.com
> On Jun 17, 2022, at 7:21 AM, Sam Haraldson via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
>
>
> Carl,
>
> We are fans of the Rooftech RT Mini product for applications that don't allow us to employ rafter attachments. We are primarily a SnapNrack installer and the RT Mini base works well with the SNR uppers. We have been using them for perhaps four years, maybe five and have seen no issue in that (albeit somewhat short) period of time.
>
> Another option might be looking into Ironridge XR1000 rails which have much higher spans than the normal 48" (up to 12' depending on snow loading).
>
> https://www.ironridge.com/component/xr-rails/
>
> Sincerely,
> Sam Haraldson
> Installation & Service Manager
>
> | o. (406) 551-6135
>
>
>>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220617/dc81c25e/attachment.htm>
More information about the RE-Wrenches
mailing list