[RE-wrenches] Best peal and stick zip tie anchor

[James Jarvis]

We have been using VHB zip tie bases for at least 10 years. They are
marginally better than the foam zip tie bases. Some material they fall
right off of and some material they do quite well on. In all cases they do
better than the foam tape bases. But that may not be good enough. We
consider adhesive zip tie bases a temporary fastening.


-James Jefferson Jarvis
APRS World, LLC
+1-507-454-2727
http://www.aprsworld.com/


On Wed, Jun 8, 2022 at 4:07 PM Jay via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> I’m wondering if anyone has ever used a high quality VHB zip tie
> attachment base on the center “ junction” box of a mid junction box panel.
>
> I’m just looking for options to anchor the wire on that perfect location,
> which has no attachment.
>
> And if you have what are the best parts to get.
>
> Wiring for MLPE on Unirac RM10
>
> Thx
>
> Jay
>
>
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220608/25d74b93/attachment.htm>